Live Stock Ipollo G1 40G/s 2800W miner Grin coin , High Profit

Method/Step

1. Unpacking: The physical size is: 535x450x307mm, the logistics weight is 21.8KG, and the inside is protected by two pieces of pearl foam.

2. Ipollo G1 Grin mining machine mining configuration ipollo G1 Grin mining machine factory default is DHCP to automatically obtain the IP address, you can find the IP address of the G1 miner through the local router or cooperate with the IP button, and enter the IP address into the browser address Bar to enter the miner login page. The default login user name and password are both admin.

3. The homepage shows the operating status interface of the mining machine. The interface mainly displays the current computing power, fan speed, temperature and mining pool rejection rate of the ipollo G1 mining machine.

In addition to the miner status on the left side of the control panel page, there are 3 menu sections: system operation status, system configuration and network configuration. Several commonly used configurations are mainly: mine pool/miner configuration; network configuration; check chip status; modify login password; update firmware.

4. Select the menu miners (miner status)/Pool Configuration (mine pool configuration) page to configure the mine pool and miners.

Select the menu miners (miner status)/Network Configuration (network configuration) page to choose to set the miner to DHCP (automatically obtain an IP address) or Static (static IP address).

In the menu miners (miner status)/Asia Status (chip status) page, you can view the operating status of each chip. The chip position is green during normal operation, and the value is displayed normally. When the chip fails and does not work, the chip position is gray, no Numerical display.

5. In the menu miners (miner status)/Administrator page, you can modify the miner login password.

6. Most of the configuration operations of the ipollo G1 Grin mining machine can be completed on the miners (mining machine status) page, only the configuration of the updated firmware is placed in the System (system configuration), and enter System/Backup Flashwqre (firmware backup/restore/update) ) Page, can generate the backup file download/restore of the current system, can reset the miner, restore the backup file, etc., and can also update the system firmware. In fact, I think it will be more convenient to put this function under the menu bar of miners (mining machine status).

7. When the air inlet temperature is 32 degrees, the air outlet temperature of the miner is 46.4 degrees, and the temperature difference is 14.4 degrees, which is within the normal range. The power outlet temperature is 38.1 degrees, and the temperature difference is 6.1 degrees.

The ipollo G1 Grin mining machine has a 24-hour average computing power of 40G/s. Combined with the power consumption of 2800W, the power consumption ratio of the pineapple G1 Grin mining machine is 70W/G.